Black Friday −20%
£1,390.00 Original price was: £1,390.00.£1,112.00Current price is: £1,112.00.You save £278.00
Replace the steel bonnet of your Mercedes-AMG G63 W463 / W464 with this dry pre-preg carbon fibre bonnet.
Straight answers on fitment, lead time and build direction — direct from the team that engineers it.
Open WhatsApp Line →Every component leaves on one standard: measured fitment, disciplined materials, and a specialist on the line before and after you order. The proof sits below — not the promise.
Each part is 3D-scanned against the platform and digitally modelled before tooling — so fitment is engineered, not approximated.
Pre-preg carbon and lightweight composite, finished to a consistent standard and built for structural intent — not cosmetic weight.
A specialist answers fitment, lead time and compatibility before you order — and stays reachable after it ships.
Replace the steel bonnet of your Mercedes-AMG G63 W463 / W464 with this dry pre-preg carbon fibre bonnet. It saves significant weight over the front axle and gives the car an unmistakable carbon centrepiece.
Fitment depends on the exact model, bumper and specification. If you are not sure, contact us with your VIN or a photo of the original part and we will confirm fitment before you order.
| Brand | ASM Sports Tech |
|---|---|
| Part | Bonnet (hood) |
| Material | Dry pre-preg carbon fibre, autoclave-cured |
| Finish | Gloss clear coat with UV protection |
| Fitting | Factory hinges and latch – professional fitting recommended |
| In the box | Carbon bonnet |
| Platform | Mercedes-Benz G-Class W463 / W464 |
| Part number (SKU) | ASMC130 |
Moulded on the original bonnet, it uses the factory hinges, latch and gas struts. Every ASM part is checked for fit and finish before it leaves us, and is backed by our warranty and UK-based support.
Dry pre-preg carbon fibre is laid up from fibre sheets that are pre-impregnated with resin and cured under heat and pressure in an autoclave. The result is lighter and stiffer than wet-laid carbon, with a cleaner, more consistent weave. Read more in our guide to dry vs wet carbon fibre.
A bonnet must be fitted and aligned by a professional body shop. Transfer the latch, insulation and washer jets from the original bonnet and check panel gaps and latch operation before driving. Always use bonnet pins or a secondary safety catch as recommended. Clean carbon surfaces with a soft microfibre cloth and pH-neutral products, and protect them with a UV-stable wax or ceramic coating. Step-by-step advice: How to protect and maintain carbon fibre parts.
Every order ships from the UK with tracked delivery to the UK, Europe and worldwide. Delivery options and costs are shown at checkout and explained in our shipping policy. Unused items in original condition can be returned within 14 days, and return shipping is paid by ASM – see the refund policy. Manufacturing defects are covered by the ASM warranty.
It is made for: Mercedes-Benz G-Class W463 (G500, G550, G63 AMG) – 2012–2018; Mercedes-Benz G-Class W464 (G500, G63 AMG) – 2018+. If your car has a different bumper, trim level or aftermarket parts, contact us with your VIN and we will confirm fitment before you order.
No special skills are needed for most owners, but take your time. A bonnet must be fitted and aligned by a professional body shop. If you prefer, any specialist or body shop can fit it quickly.
Dry pre-preg carbon is cured under heat and pressure with a controlled amount of resin, so it is lighter, stiffer and has a cleaner weave than wet-laid carbon. Our guide on wet vs dry carbon fibre explains the difference.
Yes. We ship from the UK to the UK, Europe and worldwide with tracked delivery. Prices can be shown approximately in EUR or USD, and orders are charged in GBP.
Mercedes-AMG G63 W464 Dry Carbon Fibre Storage Box & Door Panel Trims
Mercedes-Benz G-Class W464 / GLE W167 / GLS X167 Dry Carbon Fibre Stick-On Mirror Covers
Mercedes-Benz G-Class W463 Dry Carbon Fibre Door Handle Covers
Mercedes-Benz G-Class W463 Carbon Fibre C-Pillar Rear Door CoversFitment, installation, materials, lead time and support — the answers that settle the last doubts before you order. Anything not covered, the specialist line is one tap away.
Fitment is defined by the product title, the listed application scope and your platform. If you're unsure, open the WhatsApp line and a specialist will confirm the correct application before you order.
Yes — particularly for carbon aero, exhaust components and platform-specific upgrades, where alignment, finish protection and correct hardware positioning matter to the result.
It depends on the part, but the standard is consistent: disciplined finish, clean visual consistency and resolved platform-specific presentation. Pre-preg carbon and lightweight composite where the application calls for it.
It depends on whether the part is in stock or built to order. The estimated timeline on the product page is the reference to use before checkout — and the specialist line can confirm it for your exact spec.
Yes. For fitment, visual direction, material choice or build planning, use the WhatsApp block on this page and a specialist will guide you before you place the order.
Yes — worldwide shipping is available across most ASM Sports Tech lines. Method and transit time vary by product category, destination and dispatch origin.
Order directly with ASM Sports Tech, or through an authorised partner in your region. Same components, same standard — whichever route fits the build.
Prefer a local point of contact? An authorised ASM partner in your region can handle the order end to end.
Multi-part builds and full upgrade directions are best coordinated as one order — we'll plan it with you before placement.
Order direct from ASM or through a partner — the parts, the fitment standard and the support are identical either way.
Matching components for the same platform — selected to fit alongside what you're ordering and finish the build as one resolved direction.